Wave Contact Lenses - Video Training

Table of Contents

The Wave Video Training Series is designed in easy to follow modules. Each item in the table of contents is it's own short video segment. Whenever you need review of a specific topic, simply go the module that covers that topic and then select that topic within the videos table of contents.

Module 1 - Wave Screen Overview

  1. Getting Started
  2. Top Display
  3. Tear Layer View
  4. Axial/Tangential
  5. Spectacle Rx
  6. QuadView
  7. Lens Cross Section
  8. Topo Demand
  9. Lower Screen
  10. Conclusion

Module 2 - Wave Fundamental Concepts

  1. Wave Fundamentals
  2. Axial And Tangential
  3. Control Points
  4. Back OZ (central Curvature)
  5. SAM/FAP
  6. Back IC (intermediate curvature)
  7. Back BP (edge lift/bevel position)
  8. Bevel Lift
  9. Design Modes
  10. RSym
  11. GSym Explained
  12. GSym v. FForm (example)
  13. GSym Toric Example
  14. FForm Explained
  15. Back V. Front Curvature Views
  16. Quadrant Control Setting

Module 3 - Your First Lens Design (Basic Wave Design)

  1. Introduction
  2. Evaluating The Topography For Lens Design
  3. Opening Wave From Scout
  4. Entering A Spectacle Refraction
  5. Using Trial Lens Data
  6. Contact Lens Diameter
  7. RSym
  8. Pre-Design Recap
  9. OZ Placement
  10. Auto Design - Current Settings
  11. Back Curvature View
  12. Bevel Lift
  13. Design Overview
  14. Center and Edge Thickness
  15. Review and save
  16. Start to Finish Design

Module 4 - Advanced Lens Design

   GSym Contact Lens Design (Module 4, Part 1)

  1. Introduction
  2. Evaluating The Topography For Lens Design
  3. Core Design Parameters
  4. Gsym Discussion
  5. Aligning The Back Surface
  6. Empirical Over Refraction
  7. Back Curvature View
  8. Review And Save
  9. Conclusion and Review

   FForm Contact Lens Design (Module 4, Part 2)

  1. Introduction
  2. Evaluating The Topography For Lens Design
  3. Sagittal Depth as a design indicator
  4. OZ and IC
  5. Back Curvature
  6. Aligning the Back Surface
  7. Review And Save
  8. Conclusion

Module 5 - Multifocal Lens Design

  Basic Multifocal Lens Design (Module 5, Part 1)

  1. Introduction
  2. Evaluating The Topography For Lens Design
  3. Incorporating An Add Power
  4. Core Lens Design
  5. Front Curvature Values
  6. Front Curvature Display
  7. Distance Zone
  8. Review And Save
  9. Conclusion

Basic Multifocal Lens Design (Module 5, Part 1)

  1. Introduction
  2. Lens Design
  3. Troubleshooting Near Vision
  4. Troubleshooting Distance Vision
  5. Troubleshooting Overall Vision
  6. Multifocal Discussion
  7. Review and Save
  8. Conclusion

Module 6 - Auto Design Custom Settings and OrthoKeratology

  Auto Design Custom Settings Feature (Module 6, Part 1)

  1. Introduction To Custom Settings
  2. Overview
  3. Back OZ
  4. Display Walk Through
  5. Target Lens Power
  6. Creating and Deleting Definitions
  7. Default Lens Type
  8. Lens Design Example
  9. Discussion
  10. Troubleshooting
  11. Conclusion

  OrthoKeratology Lens Design (Module 6, Part 1)

  1. Introduction To Wave OrthoK
  2. Tear Layer View
  3. Using Auto Design Custom Settings
  4. Back OZ and IC
  5. Apical Clearance
  6. Edge and Bevel Lift
  7. Center Thickness
  8. Target Lens Power
  9. Diameter
  10. Lens Style
  11. Review and Save
  12. Making Minor Adjustments
  13. Adjusting The Topo Demand
  14. Maintaining An RSym Center
  15. Conclusion